The SmallRig 3765 Top Handle is designed to add a comfortable overhead grip and accessory options to a compatible camera cage.
This smallrig camera cage review looks at its mounting layout, construction, and the rig setups it may suit.
SmallRig 3765 Handle Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 3765 Top Handle
A lightweight camera-cage handle for videographers who want a low-angle grip and several mounting points for small accessories.
- ARRI-style anti-twist locating mount intended for compatible camera cages.
- Hollowed-out design and aluminum-alloy construction, with silicone surfaces described as anti-slip and anti-freeze.
- Listed weight of 124 g.
- Five built-in cold shoes: three at the front and two at the rear.
Pros
- Five cold shoes allow a flexible placement plan for compatible accessories.
- ARRI-style locating holes are designed to resist twisting when paired with a compatible cage mount.
Consider before buying
- The locating mount is useful only when the cage provides a compatible interface, so check fit before buying.
- Five cold shoes and numerous threaded points may add little value to a minimal rig that carries few accessories.
Read the full review summary
This handle combines an ARRI-style locating mount with a hollowed aluminum-alloy body, silicone contact surfaces, five cold shoe mounts, and multiple threaded attachment points.
That gives a compact rig builder several ways to position accessories without relying on a single mounting location.
It is best suited to users building a cage-based camera setup who want a top grip for low-angle handling and plan to attach items such as a microphone, light, or monitor.
Its value depends on whether the cage and accessories match its mounting standards and whether five cold shoes are useful in your rig.
The buying factors
SmallRig 3765 Handle Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rig compatibility
ARRI-style locating holes and 1/4-20 and 3/8-16 mounting points support a range of cage configurations, provided the cage offers compatible attachment points.
Accessory mounting
Five built-in cold shoes plus threaded points give users several ways to arrange accessories around the handle.
Grip design
The top grip is intended to facilitate low-angle shooting, and silicone surfaces are designed to provide anti-slip and anti-freeze contact.
Portability
At 124 g, the handle adds relatively little listed weight to a rig.
Setup flexibility
The locking screw and included Allen wrench support assembly and disassembly, while multiple thread sizes broaden mounting options.
Load guidance
A maximum weight recommendation of 10 kg is provided, though the finished rig's suitability depends on the full cage and accessory setup.
Key Features and Specifications of SmallRig 3765 Handle
- ARRI-style anti-twist locating mount intended for compatible camera cages.
- Hollowed-out design and aluminum-alloy construction, with silicone surfaces described as anti-slip and anti-freeze.
- Listed weight of 124 g.
- Five built-in cold shoes: three at the front and two at the rear.
- Multiple 1/4-20 and 3/8-16 mounting points for attaching compatible accessories.
- Locking screw tightened with an included Allen wrench; listed maximum weight recommendation is 10 kg.
Pros and Cons of SmallRig 3765 Handle
Pros
- Five cold shoes allow a flexible placement plan for compatible accessories.
- ARRI-style locating holes are designed to resist twisting when paired with a compatible cage mount.
- Its 124 g weight is a modest addition to a camera rig.
- The combination of 1/4-20 and 3/8-16 points supports different accessory attachment approaches.
Consider before buying
- The locating mount is useful only when the cage provides a compatible interface, so check fit before buying.
- Five cold shoes and numerous threaded points may add little value to a minimal rig that carries few accessories.
- The handle is not water resistant, which matters when planning a rig for wet conditions.
Who Should Buy SmallRig 3765 Handle?
Good fit
Consider the SmallRig 3765 if you already use a compatible camera cage and want a top grip for low-angle shooting.
Its silicone contact areas and lightweight construction are aimed at making the handle practical to carry as part of a built-out rig.
It is also a good fit for setups where accessory placement matters.
The five cold shoes and threaded attachment points can help organize a microphone, light, monitor, or other compatible gear around the handle; check clearances and attachment standards against your complete cage before assembling.
The 10 kg maximum weight recommendation offers a reference for planning, but account for the whole rig and its mounting arrangement when deciding whether the handle fits your setup.
Who should skip it
Skip it if you need a standalone camera grip or your cage does not have a compatible ARRI-style locating interface. Confirm the cage's mounting layout first.
A stripped-down rig with no plans for additional accessories may not benefit from the handle's numerous mounting points. For outdoor work in wet conditions, note that the handle is listed as not water resistant.
How the SmallRig 3765 Handle Fits a Camera Cage
Mounting interface and cage fit
The ARRI-style locating holes are the key compatibility detail. They are intended to help secure the handle against twisting when used with a matching cage interface, while the 1/4-20 and 3/8-16 points provide other attachment options.
Before buying, compare the cage's top mounting points and available clearance with the handle's locating pattern.
Accessory layout on a compact rig
Three front and two rear cold shoes create several possible positions for accessories such as a microphone, LED light, or monitor.
More mounting spots can make a crowded rig easier to organize, but the best layout depends on accessory size, cable routing, and whether each item remains accessible during a shoot.
Weight and handling considerations
The 124 g listed weight keeps the handle's contribution to overall rig weight relatively low. Its grip is designed for low-angle work, and the silicone surfaces are intended to improve contact.
These details may suit mobile setups, though the feel and balance will depend on the camera, cage, and accessories attached.
Planning around the load recommendation
SmallRig gives a maximum weight recommendation of 10 kg. Treat that as a planning limit for the handle and consider the complete mounting system when building a rig; the cage, fasteners, and attached equipment all affect the setup.
The included Allen wrench can help with the locking screw during assembly or removal.
Alternatives to SmallRig 3765 Handle
No alternative model is recommended here. Compare the cage interface, grip shape, and accessory mounting options that matter to your setup before choosing another handle.
Is SmallRig 3765 Handle Worth It?
The SmallRig 3765 Top Handle is worth considering for a compatible cage-based rig that needs a lightweight top grip and several accessory mounting positions.
Its ARRI-style locating interface, five cold shoes, and mixed threaded points make it especially relevant to users who actively build around mounted accessories.
Check your cage's mounting pattern and your planned load before buying. If your rig is minimal, needs a different grip interface, or will be used in wet conditions, the 3765's layout may not match your priorities.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 3765 Top Handle
A lightweight camera-cage handle for videographers who want a low-angle grip and several mounting points for small accessories.
- ARRI-style anti-twist locating mount intended for compatible camera cages.
- Hollowed-out design and aluminum-alloy construction, with silicone surfaces described as anti-slip and anti-freeze.
- Listed weight of 124 g.
- Five built-in cold shoes: three at the front and two at the rear.