The VIVO STAND-V001 is a clamp-on single monitor arm for buyers who want more freedom to position a screen and reclaim some desktop space.
This vivo single monitor desk mount review focuses on its broad motion range, compatibility limits, and the desk setup it suits.
VIVO STAND-V001 Review Summary
The quick verdict

20,000+ ratings
Read Amazon ReviewsVIVO STAND-V001 Single Monitor Desk Mount
A flexible choice for desk users with one VESA-compatible monitor, including many ultrawides up to 38 inches and 22 pounds.
- Supports one monitor up to 22 pounds with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Fits most screens from 13 to 32 inches and ultrawide monitors up to 38 inches; verify the monitor’s VESA pattern and weight.
- Provides +90 to -90 degree tilt, 360-degree swivel, and 360-degree rotation.
- Allows height adjustment up to 16 inches along the center pole.
Pros
- Broad adjustment range makes it easier to change screen angle and orientation for different tasks.
- Supports ultrawide screens up to 38 inches, provided the monitor also meets the weight and VESA limits.
Consider before buying
- Compatibility is limited to monitors weighing no more than 22 pounds and using one of the two listed VESA patterns.
- The clamp is specified for desks up to 3.25 inches thick, so check your desk edge and underside clearance before ordering.
Read the full review summary
This mount supports one monitor weighing up to 22 pounds, with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
It is sized for most monitors from 13 to 32 inches and ultrawides up to 38 inches, while its tilt, swivel, rotation, and pole height adjustment give you several ways to orient the screen.
A C-clamp fits desks up to 3.25 inches thick, and an included grommet option provides another installation route.
The STAND-V001 is a practical match for a home office or workstation where a single screen needs frequent repositioning or should sit above the desk surface.
Its fit depends on both the monitor’s VESA pattern and weight, as well as the desk’s mounting area. Buyers wanting a freestanding base, a second-screen arm, or rapid spring-assisted movement should compare those specific needs before choosing.
The buying factors
VIVO STAND-V001 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Monitor compatibility
Covers common VESA 75 x 75 mm and 100 x 100 mm patterns, with support for monitors up to 22 pounds and ultrawides up to 38 inches.
Positioning range
Offers tilt from +90 to -90 degrees, 360-degree swivel and rotation, plus height adjustment along the pole.
Desk mounting flexibility
Includes a hand-tightened clamp for desks up to 3.25 inches thick and an optional grommet mount.
Portrait and landscape use
The screen can be rotated between portrait and landscape orientation, which supports different work layouts.
Cable organization
Detachable clips on the arms and center pole provide a straightforward way to route power and AV cables.
Setup convenience
A detachable VESA plate, hardware, and assembly instructions are included to simplify mounting.
Key Features and Specifications of VIVO STAND-V001
- Supports one monitor up to 22 pounds with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Fits most screens from 13 to 32 inches and ultrawide monitors up to 38 inches; verify the monitor’s VESA pattern and weight.
- Provides +90 to -90 degree tilt, 360-degree swivel, and 360-degree rotation.
- Allows height adjustment up to 16 inches along the center pole.
- Attaches with a hand-tightened C-clamp to desks up to 3.25 inches thick, or with the included grommet mounting option.
- Detachable cable clips along the arms and center pole help organize power and AV wires.
- Includes a detachable VESA plate, installation hardware, assembly instructions, and a three-year warranty.
Pros and Cons of VIVO STAND-V001
Pros
- Broad adjustment range makes it easier to change screen angle and orientation for different tasks.
- Supports ultrawide screens up to 38 inches, provided the monitor also meets the weight and VESA limits.
- Offers both clamp and grommet mounting options.
- Cable clips and a detachable VESA plate make for a tidier, more manageable installation.
Consider before buying
- Compatibility is limited to monitors weighing no more than 22 pounds and using one of the two listed VESA patterns.
- The clamp is specified for desks up to 3.25 inches thick, so check your desk edge and underside clearance before ordering.
- Height adjusts along the center pole up to 16 inches; the description does not specify spring-assisted adjustment.
Who Should Buy VIVO STAND-V001?
Good fit
Consider the STAND-V001 if you use one compatible monitor and want to lift it off the desk while gaining options for tilt, swivel, rotation, and height.
The portrait and landscape support is useful for workflows that alternate between wide layouts and taller documents, provided the monitor itself fits the mount’s size, weight, and VESA requirements.
It is also a sensible fit when your desk can accept a clamp or grommet installation and you want cables routed along the arm.
Before buying, confirm the monitor’s weight without its stand, locate the VESA holes, and measure the desk thickness where the clamp or grommet will attach.
Who should skip it
Look elsewhere if you need support for two monitors, a freestanding base, or a capacity above 22 pounds. Those needs fall outside this single-arm design’s stated configuration.
It may also be a poor fit if your monitor lacks the listed VESA pattern or your desk cannot accommodate either mounting method. Confirm the mounting area and the screen’s connection pattern before committing.
What the VIVO STAND-V001 Means for Your Desk Setup
Check the monitor fit first
Screen size alone does not establish compatibility.
The mount is rated for up to 22 pounds and lists VESA patterns of 75 x 75 mm and 100 x 100 mm; its stated range covers most monitors from 13 to 32 inches and ultrawides up to 38 inches.
Check the monitor’s manual or rear panel for the hole spacing and weight, and treat the ultrawide size as a maximum rather than a guarantee for every model.
A flexible arm for changing tasks
The arm’s tilt, full swivel, and full rotation can help position a screen for different seating angles or collaboration, while the pole allows up to 16 inches of height adjustment.
Portrait orientation can suit reading long pages or code, while landscape remains a familiar format for general work. These adjustments offer flexibility, though the best position still depends on the monitor and available desk space.
Installation depends on the desk
The hand-tightened C-clamp accommodates desks up to 3.25 inches thick, and a grommet mount is also included.
That gives buyers a choice of attachment approach, but the desk must provide a suitable edge or opening and accessible underside for the selected method. Measure the intended spot and check for obstructions before installation.
Cable routing and assembly
Detachable clips on the arms and pole help keep power and AV cables grouped as the screen moves. The detachable VESA plate is designed to make attaching the monitor more manageable, and the package includes hardware and instructions.
Allow enough cable slack for the full movement range so repositioning does not pull on connected wires.
Alternatives to VIVO STAND-V001
Computer Monitor Arms alternative

5,000+ ratings
Read Amazon ReviewsVIVO STAND-V001H Freestanding Monitor Desk Stand
Choose the STAND-V001H if you prefer a freestanding base or cannot use a clamp or grommet mount, and its narrower tilt range meets your needs.
The STAND-V001 is the better fit when desk attachment and a wider stated tilt range are priorities.
- The STAND-V001H uses a freestanding steel base, supports up to 22 pounds, and offers tilt from +15 to -15 degrees, 90-degree swivel, and 360-degree rotation.
- It supports monitors up to 38 inches and includes cable management.
- The STAND-V001 uses a desk clamp or grommet mount, supports up to 22 pounds, and offers tilt from +90 to -90 degrees.
Computer Monitor Arms alternative

60,000+ ratings
Read Amazon ReviewsVIVO STAND-V002 Dual Monitor Desk Mount
Pick the STAND-V002 if your setup needs two screens and both fit its 30-inch size limit. For one larger ultrawide, the STAND-V001 offers the more relevant single-screen configuration and supports ultrawides up to 38 inches.
- The STAND-V002 holds two monitors, each up to 22 pounds and 30 inches, using VESA 75 x 75 mm or 100 x 100 mm patterns.
- It has a C-clamp for desks up to 3.25 inches thick, an optional grommet mount, cable clips, and portrait or landscape positioning.
- The STAND-V001 supports a single monitor up to 22 pounds and up to 38 inches for ultrawides.
Is VIVO STAND-V001 Worth It?
The VIVO STAND-V001 is worth considering for a one-monitor setup that benefits from flexible positioning, portrait or landscape rotation, and a desk-mounted arm.
Its 22-pound limit, specified VESA patterns, and clamp or grommet installation requirements make compatibility checks essential.
If your monitor and desk meet those conditions, the mount offers a useful combination of adjustment, cable routing, and installation options.
Measure first, confirm the VESA pattern and screen weight, and choose it when you want an articulating arm rather than a freestanding stand or dual-monitor system.
Your review at a glance

20,000+ ratings
Read Amazon ReviewsVIVO STAND-V001 Single Monitor Desk Mount
A flexible choice for desk users with one VESA-compatible monitor, including many ultrawides up to 38 inches and 22 pounds.
- Supports one monitor up to 22 pounds with VESA 75 x 75 mm or 100 x 100 mm mounting holes.
- Fits most screens from 13 to 32 inches and ultrawide monitors up to 38 inches; verify the monitor’s VESA pattern and weight.
- Provides +90 to -90 degree tilt, 360-degree swivel, and 360-degree rotation.
- Allows height adjustment up to 16 inches along the center pole.